Welcome to Qingdao Puhua Heavy Industry DownloadSite MapContact Us
Qingdao Puhua Heavy Industry PUHUA HEAVY INDUSTRY

Professional shot blasting cleaning equipment manufacturer

+86-532-88191002
News

Current location: Home > News > >Main points of maintenance of hook shot blasting machine

Main points of maintenance of hook shot blasting machine

2021-03-30

1. Check the transfer records between employees before work.
 
2. Check if there is any debris falling into the machine, and clear it in time to prevent blockage of each conveying link and cause equipment failure.
 
3. Before operation, check the wear of vulnerable parts such as guard plates, blades, impellers, rubber curtains, directional sleeves, rollers, etc. twice every shift, and replace them in time.
 
4. Check the coordination of the moving parts of the electrical appliances, whether the bolt connections are loose, and tighten them in time.
 
5. The oil filling point of the shot blasting machine equipment should be checked regularly to see if the oil filling of each part meets the regulations.
 
6. Check the chamber body guard plate of the shot blasting machine every day. If it is damaged, it should be replaced immediately.
 
7. The operator should check the cleaning effect at any time. If there is any abnormality, the machine should be shut down immediately and the equipment should be inspected as a whole.
 
8. The operator must check whether the various switches of the control cabinet (panel) are in the required setting positions (including the power switches) before starting up, so as to avoid misoperation, damage to electrical and mechanical equipment, and damage to the equipment.
 
9. The seal must be checked daily and replaced immediately if it is damaged.
 
10. Check the quality of steel cleaning frequently, adjust the projectile projection angle and roller conveyor speed if necessary, and operate in accordance with the operating procedures correctly.



[向上]