Welcome to Qingdao Puhua Heavy Industry DownloadSite MapContact Us
Qingdao Puhua Heavy Industry PUHUA HEAVY INDUSTRY

Professional shot blasting cleaning equipment manufacturer

+86-532-88191002
News

Current location: Home > News > >How to adjust the shot blasting turbine in the shot blasting

How to adjust the shot blasting turbine in the shot blasting

2021-07-20

The pass-through shot blasting machine relies on the shot blaster to accurately project on the surface of the workpiece at high speed, remove the rust and dirt on the surface of the workpiece, strengthen the internal molecules of the workpiece, and make the internal molecules of the workpiece more closely arranged, thereby improving the mechanical properties of the workpiece Stronger.
 
It should be understood that the projectile projected by the through-type shot blasting machine mainly relies on the shot blasting device, and the long-term high-speed ejection of the shot blasting device will also cause the ejection position to be poor due to the force. This situation requires the shot blasting device. Adjustment. And how to adjust the shot blaster? Many people don't understand it. In fact, the method is very simple, that is, adjust the position of the directional sleeve so that all the projectiles fall on the workpiece to be cleaned.
 
Check whether the adjusted position of the directional sleeve is accurate, only need to replace the workpiece to be cleaned with a wooden board or white paper, start the shot blaster, input a small amount of shot material, check the position of the projectile belt, and then adjust the position of the directional sleeve to the proper position.
 
It should be noted that after the directional sleeve of the through-type shot blasting machine is adjusted, the load test can be carried out. It is necessary to make sure that the equipment is in good operation. After half an hour of shot blasting, the shot material can be added, so that the equipment can be blasted. The pill cleaning efficiency is higher and the effect is better. If you are not sure about the adjustment skills of the shot blaster, you can also consult the technicians of the equipment manufacturer.
 

[向上]